1.5KW Steam Power Plant Model BSG 002
Home » Products » 1.5KW Steam Power Plant Model BSG 002
1.5KW Steam Power Plant Model BSG 002
Study of power generation using steam boiler and performance of steam generator is
focus of this trainer. Sci-tech 1.5KW Steam Power Plant Model BSG 002, is designed the system in such fashion that enables students to investigate all the parameters governing the utilization & maintenance of a typical power plant. The system uses a small sized boiler unit that runs on LDO/gas. The generated steam is then used to run the steam turbine which in turn, runs the coupled A.C. Generator to produce the electricity or loading can be done by using Alternator & Bulb bank. A loading arrangement is also given for load test. The unit is fitted with a colored mimic diagram that illustrates the constructional and operational features. The various aspects of boiler and turbine operation and maintenance can be studied. Instrumentation is provided to measure Temperatures and Pressures. Temperature pressure characteristics of boiler can also be plotted.
Size: | 125cm x 80cm x 90cm (LxWxH) |
Weight: | 120 kg |
Item Description
Study of power generation using steam boiler and performance of steam generator is focus of this trainer. Sci-tech 1.5KW Steam Power Plant Model BSG 002, is designed the system in such fashion that enables students to investigate all the parameters governing the utilization & maintenance of a typical power plant. The system uses a small sized boiler unit that runs on LDO/gas. The generated steam is then used to run the steam turbine which in turn, runs the coupled A.C. Generator to produce the electricity or loading can be done by using Alternator & Bulb bank. A loading arrangement is also given for load test. The unit is fitted with a colored mimic diagram that illustrates the constructional and operational features. The various aspects of boiler and turbine operation and maintenance can be studied. Instrumentation is provided to measure Temperatures and Pressures. Temperature pressure characteristics of boiler can also be plotted.
Technical Specifications
System Components
Boiler 200 Kg/Hr at 11 bar
Single-stage Steam turbine with Curtis wheel and hydraulic speed regulator: 1.5 KW @ 3000RPM
Fuel consumption: 12L/h
Heat-up time: 8min
Max. pressure: 13bar
Heater: power 24 KW (In case of Electrically fired Steam Generator)
Condenser Shell & Tube Type.
Pressure measurements: 3 x 0 to 16 bar; 2 x 0 to 4 bar; 1 x -1 to 1 bar
Chimney
Orifice meter
Control valve: Electric Solenoid Type
Pump Centrifugal pump: 2~3 HP capacity & Piston Reciprocating Pump.
Flow meter: Flow rate 0 to 160L/min (Cooling)
Water Softener (Optional)
Steam Calorimeter- Separating & Throttling calorimeter
Temperature Indicator: 12 channel input: K Type thermocouple
Fuel supply system: Volumetric Type capacity 50Liter
K Type Thermocouple temp. Sensor
Temperature measurements: 12 x 500 to 4000C; 1 x 0 to 1000C
Torque measurement: 0 to 10 Nm
Digital Tachometer 0 -9999rpm.
Voltmeter 0-500 V.
Ammeter 0-10 Amp.
Loading arrangement- Electrical Alternator
Lamp Bank
Control panel
Cooling Tower (Optional)
Computerized Data Acquisition System
OPTIONS:
Super Heater.
Blow Down Tank
Sci-CalR Computer Control Software & Interface
Sci-CalR software & hardware has been designed for use with more than 600 ‘Sci-tech’ trainers. Sci-CalR comes in a module that can be fitted or mounted on the Sci-tech trainers very easily.
Sci-CalR box has 11 inches front HMI interactive panel, inside are i3 processor computer with it’s own hard drive & software processor with 16 to 32 analog and 16 to 32 digital signal data-loggers. The ‘LabVIEW’ processes the input signal with in-built data and formulae to tabulate results for the Sci-tech trainers.
Sci-CalR box has HDMI output for connection to a projector or an electronic whiteboard or a monitor.
Sci-CalR box has input ports for inputs from the Sci-tech trainer sensors.
Sci-CalR eliminates requirement of external computer.
Range Of Experiments
- Study of steam operated power plant.
- First and second law of thermodynamics analysis of complete steam plant
- Determination of turbine power output with closed nozzles.
- Calculation of turbine power output with open nozzles.
- Measurement of power by dynamometer
- Study of Efficiency of generator
- Study of specific consumption of steam against power generated.
- Study of thermodynamic Efficiency.
Service Required at Site
- Electric Supply 3 phases 440 V AC with neutral & proper earthing.
- Water supply for Boiler & drainage facility
- Cooling Water 10m3/hr
- Sump water tank 15000 ltr capacity approx.
- Compressed air connection: 4.5 bar, 150Ltrs/hr
- Boiler feed water tank 1000 ltr
- Piping for plant to site water tanks & drainage tank.
- Diesel – 40 liter (In case of Diesel Fired Steam Generator)
- Holes in wall for smoke soot & other drainage
- Foundation & Trench
- Room size: 8mtr X 5mtr X 7mtr.
Model Number
BSG 002
See also different:
Sci-tech Inverted Pendulum Apparatus Model MT 115’s learning contents of the experimental unit are extended by ‘Controller Unit’ that is more complex because of its two independent drives. Conducting the experiment makes high demands on the sy [...]