Microprocessor Trainers 8085

8085 MICROPROCESSOR TRAINING KIT (LED version) Model M85-01
 Based on 8085 CPU operating at 6.144 MHz.
 16K bytes of Powerful Monitor Program using 27512 EPROM
 32K bytes of RAM using 6264 with Battery Backup using NICD Battery.
 On-board one memory expansion up to 56KB.
 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
 24 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
 RS-232C interface through SID/SOD lines.
 Two mode of commands:
– Hex Key pad Mode
– Serial Mode
 28 keys hexadecimal keyboard and six seven segment display using 8279
 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through hex keyboard or PC serial mode.
 Facility for Downloading/Uploading files from/to PC.
 All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
 All ICS are mounted on IC Sockets.
 Bare board Tested Glass Epoxy SMOBC PCB is used.
 In-Built Power Supply of +5V/1.5A, ±12V/250mA
 Attractive Wooden enclosures of Light weight Australian Pine Wood.
 User’s Manual with sample programs

8085 MICROPROCESSOR TRAINING KIT (LED version) Model M85-02
 Based on 8085 CPU operating at 6.144 MHz.
 8K bytes of Powerful Monitor Program using 27512 EPROM
 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
 On-board one memory expansion up to 56KB.
 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
 24 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
 22 I/O lines provided through 8155 brought at 26 Pins FRC Connector.
 RS-232C interface through SID/SOD lines
 Two mode of commands:
– Hex Key pad Mode
– Serial Mode
 28 keys hexadecimal keyboard and six seven segment display using 8279
 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through hex keyboard or PC serial mode.
 Facility for Downloading/Uploading files from/to PC.
 All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
 All ICS are mounted on IC Sockets.
 Bare board Tested Glass Epoxy SMOBC PCB is used.
 In-Built Power Supply of +5V/1.5A, ±12V/250mA
 Attractive Wooden enclosures of Light weight Australian Pine Wood.
 User’s Manual with sample programs

 

8085 MICROPROCESSOR TRAINING KIT (LED version) Model 85-03
 Based on 8085 CPU operating at 6.144 MHz.
 8K bytes of Powerful Monitor Program using 27512 EPROM
 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
 On-board one memory expansion up to 56KB.
 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
 48 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
 RS-232C interface through SID/SOD lines brought out on a 9-Pin D- Type connector.
 Two mode of commands:
– Hex Key pad Mode
– Serial Mode
 28 keys hexadecimal keyboard and six seven segment display using 8279.
 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through hex keyboard or PC serial mode.
 Facility for Downloading/Uploading files from/to PC.
 All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
 All ICS are mounted on IC Sockets.
 Bare board Tested Glass Epoxy SMOBC PCB is used.
 In-Built Power Supply of +5V/1.5A, ±12V/250mA
 Attractive Wooden enclosures of Light weight Australian Pine Wood.
 User’s Manual with sample programs

OPTIONAL
EPROM PROGRAMMER (Interface Module) FOR 27SERIES viz. 2716, 2732, 2764, 27128, 27256, 27512

 

8085 MICROPROCESSOR TRAINING KIT (LCD version) Model M85-04
 Based on 8085 CPU operating at 6.144 MHz.
 8K bytes of Powerful Monitor Program using 27512 EPROM
 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
 On-board one memory expansion up to 56KB.
 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
 48 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
 RS-232C interface through SID/SOD lines
 Two mode of commands:
– ASCII Key pad Mode
– Serial Mode
 20×2 Alphanumeric LCD Display with Backlight.
 101 ASCII Keyboard interface using 89C2051 operating @ 12MHz.
 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode.
 On board Single Line Assembler / Dis-assembler
 Facility for Downloading/Uploading files from/to PC.
 All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
 All ICS are mounted on IC Sockets.
 Bare board Tested Glass Epoxy SMOBC PCB is used.
 In-Built Power Supply of +5V/1.5A, ±12V/250mA
 Attractive Wooden enclosures of Light weight Australian Pine Wood.
 User’s Manual with sample programs
OPTIONAL
EPROM PROGRAMMER FOR 27SERIES viz. 2716, 2732, 2764, 27128, 27256, 27512

 

8085 MICROPROCESSOR TRAINING KIT (LED version) Model M85-06
 Based on 8085 CPU operating at 6.144 MHz.
 8K bytes of Powerful Monitor Program using 27512 EPROM
 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
 On-board one memory expansion up to 56KB.
 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
 24 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
 22 I/O lines provided through 8155 brought at 26 Pins FRC Connector.
 On-board Interrupt Controller using 8259 terminated on 26 pin FRC Connector.
 On-board USART using 8251 terminated on a 9 pin D-Type Connector.
 RS-232C interface through SID/SOD lines brought out on 9-Pin D-Type connector.
 Two mode of commands:
– Hex Key pad Mode
– Serial Mode
 28 keys hexadecimal keyboard and six/eight seven segment display using 8279 brought out at 26 Pins FRC Connector
 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through hex keyboard or PC serial mode.
 Facility for Downloading/Uploading files from/to PC.
 All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
 All ICS are mounted on IC Sockets.
 Bare Board Tested Glass Epoxy SMOBC PCB is used.
 In-Built Power Supply of +5V/1.5A, ±12V/250mA.
 Attractive Wooden enclosures of Light weight Australian Pine Wood.
 User’s Manual with sample programs.
OPTIONAL
 Real Time Clock using RTC6242

 

8085 ADVANCE MICROPROCESSOR TRAINING KIT (LCD version) Model M85-07

 EPROM PROGRAMMER FOR 27SERIES viz. 2716, 2732, 2764, 27128, 27256, 27512 Based on 8085 CPU operating at 6.144 MHz.
 8K bytes of Powerful Monitor Program using 27512 EPROM
 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
 On-board one memory expansion up to 56KB.
 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
 48 I/O lines provided using 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
 RS-232C interface through SID/SOD lines brought out on a 9-Pin D- Type connector.
 Two mode of commands:
– ASCII Key pad Mode
– Serial Mode
 20×2 Alphanumeric LCD Display with Backlight.
 101 ASCII Keyboard interface using 89C2051 operating @ 12MHz.
 On-board EPROM Programmer for 27 series viz. 2716, 2732, 2764, 27128, 27256, 27512.
 On-board Printer Interface provided on 25 pin D-Type Connector to interface with DOT MATRIX Printer.
 On-board Interrupt Controller using 8259 terminated on 26 pin FRC Connector.
 On-board USART using 8251 terminated on a 9 pin D-Type Connector.
 On-board 1 Channel SPDT Relay terminated on a 10 pin FRC Connector.
 On-board 1 Channel Opto Coupler using MCT2E terminated on 10 pin FRC Connector.
 On-board 8 Channel 8 bit ADC using ADC0809 terminated on 26 pin FRC Connector.
 On-board 1 Channel 8 bit D/A using DAC0800 terminated on 26pin FRC Connector.
 On-board Speaker Interface brought out on 2mm banana connector.
 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode.
 On Board Single Line Assembler / Disassembler
 Facility for Downloading/Uploading files from/to PC.

 

8085 MICROPROCESSOR TRAINING KIT (LCD Version) Model Micro-85

All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.

 All ICS are mounted on IC Sockets.

 Bare board Tested Glass Epoxy SMOBC PCB is used.

 Based on 8085 CPU operating at 6.144 MHz.

 8K bytes of Powerful Monitor Program using 27512 EPROM

 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.

 On-board one memory expansion up to 56KB.

 Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.

 24 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.

 RS-232C interface through SID/SOD lines

 Two mode of commands:

– ASCII Key pad Mode

– Serial Mode

 16×1 Alphanumeric LCD Display with Backlight.

 101 ASCII Keyboard interface using 89C2051 operating @ 12MHz.

 Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode.

 On board Single Line Assembler / Dis-assembler

 Facility for Downloading/Uploading files from/to PC.

 All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.

 All ICS are mounted on IC Sockets.

 Bare board Tested Glass Epoxy SMOBC PCB is used.

 In-Built Power Supply of +5V/1.5A, ±12V/250mA

 Attractive Wooden enclosures of Light weight Australian Pine Wood.

 User’s Manual with sample programs