Electrical & Electronic Modular System Trainer Model ETR 018
Aesthetically designed injection moulded electronic desk (Master unit) carrying useful experiment resources Variable Power supplies / Status / Pulsar / Function Generator , DPMs etc. while the central slot will carry replaceable experiment panels secured in an ABS molded plastic sturdy enclosure, and has colorful screw less overlay showing circuit & its connection tag numbers for easy connectivity.
– Connection through Sturdy 4mm Banana Sockets & Patch Cords.
– Hands on learning by constructing circuits using built in power bread board panel as well as optionally using Discrete component panel.
– Set of Users Guide provided with each Unit.
– Order 10 MUs & multiples of 10 or more panels set.
* Built in Power Supply
[A] DC Supply : 5V / 1A. & ± 12V, 500mA.
0 to 15V DC (Variable), 100 mA (Isolated )
0 to 30V DC (Variable), 100 mA (Isolated )
High Volt DC - 15V to 220 V, 100mA.
[B] AC Supply : 12-0-12V AC,150 mA. Short circuit protected
* Built in Function Generator
Output Waveform - Sine, Triangle & TTL O/Ps
Output Frequency - 1 Hz to 1MHz in 6 ranges, with
amplitude & frequency control pots. O/P
Voltage 20V p-p max.(Sin / TRG)
Modulation I/P - AM : - I/P voltage + 5V (100% modulation)
O/P - For 0V (min), + 5V (max.)
- 5V (Phase reversal of O/P)
FM : I/P voltage ± 400mV
( + 50% modulation)
* Clock Generator: 10 MHz TTL clock.
* Data Switches (10 no.) & bi-colour LED status indicators 10X2 nos, for High/Low indication.
* Pulser switches (2 nos.) With four debounced outputs........2no.
* Optional BNC to 2 channel banana adapter........................2no.
* Logic probe to detect High/Low level pulses upto 1MHz, with bi-colour LEDs to indicate status.
* 2 / 4 digit 7 segment display with BCD to 7 segment decoder.
* Onboard DPMs provided with mode/range selection.
(A) DC volt - 2V/200V...........................................1no.
(B) DC current -
2mA/200mA................................1no.
(C) DC Volts/Current -
20V/200mA.......................1no.
* Onboard moving iron meters provided for
(A) AC Current : 1 AMP .................................1No.
(B) AC Voltage : 15V......................................1No.
* Onboard speaker - 8 Ohms, 0.5 Watt (1no.)
* Onboard POTS : 1K......................1no.
1M.....................1no.
* Mechanical Dimensions
(A) Master Unit : 400mm(W), 125mm(H), 270mm(D)
Net weight: 8 Kg. Gross Wt: 10 Kg.
(B) Panel : 215mm(W), 165mm(H), 40mm(D)
Net weight: 700 gm approx.
* Operating Voltage - 220/240Vac switch settable +/- 10%, 50Hz/72VA.
