Advanced Fiber Optic Trainer Model TCM 008-02
Sci-tech TCM 008-02 is a single board Fiber Optic Trainer Kit to study the characteristics of Fiber using Digital and Analog techniques. This kit also facilitates with digital and analog Modulation & Demodulation communication techniques.
SKU:
8a7aa3e4737f
Categories: FIBRE OPTICS COMMUNICATION LAB TRAINERS TCM 008 Series, Telecom Trainers, Trainers
Features
– 660nm and 850/950nm Transmitter
– Two nos. of Photo Detector
– On-board Sine & Square wave generator
– On-board Manchester Coding / Decoding Technique
– On-board Noise Generator & PRBS Generator
– On-board Bit error Rate Measurement
– On-board PC to PC Communication
– On-board 4th Order Low Pass Filer
– On-board Fault Switch
– In-built Power Supply
Transmitter: One Fiber Optics LED having peak wavelength of emission 660 nm. One Fiber Optics LED having peak wavelength of emission 850/950 nm.
Receiver: Two Fiber Optic photo detector.
Modulation Techniques: Digital communication with Pulse Code Modulation (PCM) using Motorola MC 145502
CODEC Chip.
- Manchester Coding/ Decoding Technique.
- White Noise Source output type Noise Generator
- Amplitude of 0 to 5Vpp.
- 16 Bit switch selectable PRBS generator
- Clock of 32, 64, 128 KHz.
- Bit error rate measurement of 8 bit counter with LED indication upto 255 count.
- Time Division Multiplexing, 16 Channels (64 Kbits/Sec).
- Two Frame Marker of 8 bit user selectable markers in alternate frames.
- Data Rate of 1.024 MBits/Sec.
- 2 channels Voice PCM with Telephone Hand sets (A Law).
- Analog Input of 1Vp-p.
- A n a l o g B a n d-wi d t h o f 3.75KHz.
- FWHM Spectral Width of 100 nm.
Drivers : Analog & Digital
AC Amplifiers : 1 Nos.
PLL Detector : 1 No.
Filters : 1 No 4th order Butterworth 3.4 KHz cut-off freq.
Analog Band Width : 350 KHz.
Digital Band Width : 2.5 KHz.
Functional Generator : 1Hz. To 100 KHz sine wave (amplitude adjustable) 1Hz. To 100 KHz square wave (TTL)
CODEC Link : Two Telephone Hand set provided
Serial PC to PC link : 9 Pin D-type RS232C TX and Rx link (Max. 115.2 Kbps Baud)
Switched Faults : 8 Switch Faults are provided to study different effects on circuit.
Fiber Optics Cable : Connector type Standard SMA ( s u b mi n i a t u r e assembly). Duly polished fiber at both end for Numerical Aperture Measurement.
Cable Type : Step indexed multimode PMMA plastic cable.
Core Refractive Index : 1.492.
Clad Refractive Index : 1.406.
RELATED PRODUCTS
Aerodynamic Trainer Model AT 010
Rated 0 out of 5
Electrostatic Precipitator Trainer ENV 003
Rated 0 out of 5
Filtration Pilot Plant ENV 015
Rated 0 out of 5
Hydrological Cycle Apparatus ENV 006
Rated 0 out of 5