Sci-tech Variable Forces Apparatus Model MT 092 is designed to reinforce the general principle that the work done, particularly by a variable force, can be determined simply by measuring the area under the graph of force and distance moved.
The experiment is deliberately simple so that theoretical comparisons are easily made. It forms a good introduction to simple machines, leading to later studies on machine performance.
Sci-tech Variable Forces Apparatus Model MT 092 is a simple lifting mechanism with obvious non linear characteristics. A suspension cord carrying a loaded trolley at mid span is tensioned by passing the cord over a pulley at one end and down to a weight hanger. As the vertical effort is increased, the tensioned cord will move to a new equilibrium position lifting the loaded trolley. Heights of the load and effort are measured relative to the base. All the pulleys are fitted with ball bearings to minimize friction effects.
A pivoted arm carrying a load hanger at its end is restrained by a spring balance at right angles to the arm. The angular position of the arm is indicated by a protractor scale attached to the back board.
The effort is the force needed to hold the weighted arm at a particular angle. This can be repeated for several different weights.
– Table unit for experiments on mechanical work and potential energy
– Lifting a weight using a lever and a dynamometer (spring balance)
– Integrated angle measuring scale (protractor)
– 2 set of weights
– Both experiments catered for on individual sides of back board
– Spring balance 0…60N