Tensile Test Machine Model MT 100
Tensile Test Machine Model MT 100
Strength of materials is a subject of mechanical engineering, industrial engineering and structural engineering that studies the strain in deformable solid models. Strength is defined as the capacity to withstand stresses or loads applied on a body without permanently breaking, deforming or damaging it.
Sci-tech Tensile Test Machine Model MT 100, has been designed to study the tensile tests on specimens made of different material.
Item Description
The tests related to this discipline are based on obtaining a relation between the forces applied to a material, called loads, and the strains and displacements generated on that material.
One of the most typical experiments is the tensile test. It is a mechanical test to determine the strength of a material by subjecting it to stress. It is classified as a destructive test (the material suffers failure or significant damage in its structure) in which a specimen is subjected to a tensile load till the material is broken.
With Sci-tech Tensile Test Machine Model MT 100, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different materials, calculate the maximum tensile force, distinguish between the different regions of a stress-strain chart of a material subjected to tension, and obtain the yield point of the material.
Technical Specifications
Anodized aluminum frame and panels made of painted steel. Main metallic elements made of
stainless steel.
Case and protector for the specimens.
Structural panel of dimensions: 660 x 890 mm.
Two guide bars of stainless steel.
Protector for the specimen
Three springs.
Dial gauge, range: 0 – 20 mm; accuracy: 0.01 mm. Caliper. Digital.
Test specimens:
Twelve specimens made of S235JR steel (2 x 2 mm).
Twelve specimens made of aluminum, purity 99.5 % (2 x 2 mm). Twelve specimens made of
aluminum H-111, “Duralumin” (2 x 2 mm). Twelve specimens made of PVC (5 x 3 mm).
Twelve specimens made of Nylon (2 x 2 mm).
See also different:
Sci-tech Mobile Bed & Flow Visualization Demonstrator Model FM 68 consists of a tank made in three sections; inlet tank, working section and the discharge tank.
