PULSE CODE TRANSMITTER/RECEIVER TRAINER TCM 015-04, TCM 015-05

MODEL TCM 015-04 – TDM PULSE CODE MODULATION
MODEL TCM 015-05 – TDM PULSE CODE DEMODULATION KIT

SKU: e4f53d39a043 Categories: Telecom Trainers, Trainers

Description
Technical Specification

LIST OF EXPERIMENTS MODEL TCM 015-04:
List of experiments will be same for both ACT-04and ACT-05.
ACT-04 and ACT-05 are combined to perform the experiments

LIST OF EXPERIMENTS MODEL TCM 015-05:
* Study of Sampling and Multiplexing Techniques and the Reconstruction
* To study the principles of Analog to Digital and Digital to Analog Conversion
* Study of Pseudo Random Sequences
* Study of Error Check Code Logic:
– None Parity Coding.
– Odd Parity Coding
– Even Parity Coding
– Hamming Coding
* Study of Synchronization techniques

MODEL TCM 015-04: * Sine Wave Generator - Provides Sine waveform output of 500Hz, 1 KHz. - Provision for Amplitude adjustments provided. * DC Source - Two Nos. of variable DC source. - Provision for Amplitude adjustments provided. * Mode of Operation - Fast (240 KHz/Channel approx) - Slow (1Hz. /channel approx.) * On-board features - Two Nos. of Input Channels. - Pseudo random sync. Code generator for FRAME Synchronization. - PLL for Bit synchronization. - Block Description Screen printed on glassy epoxy PCB * Interconnections - All interconnections are made using 2mm banana Patch cords. * Test points are provided to analyze signals at various points. * All ICS are mounted on IC Sockets. * Bare board Tested Glass Epoxy SMOBC PCB is used. * In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication * Attractive Wooden enclosures of Light weight Australian Pine Wood. * Set of 2mm Patch cords for interconnections * User’s Manual with sample experimental programs MODEL TCM 015-05: * Input Channels - 2 Channel Time Division Multiplexed Pulse Code Modulation Receiver. * Mode of Operation - Fast (240 KHz/Channel approx) - Slow (1Hz. /channel approx.) * On-board features - Pseudo random sync. Code generator for FRAME Synchronization. - Receiver clock generation using PLL - Error Detection of None, Even, Odd, Hamming - Error Correction using Hamming Code technique - None, Even, Odd, Hamming Parity selections - Two Nos. of 4th order Butterworth Low pass filter with cut off frequency of 3.4 KHz. - Four Switched Faults for Fault Selection - Block Description Screen printed on glassy epoxy PCB * Interconnections - All interconnections are made using 2mm banana Patch cords. * Test points are provided to analyze signals at various points. * All ICS are mounted on IC Sockets. * Bare board Tested Glass Epoxy SMOBC PCB is used. * In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication * Attractive Wooden enclosures of Light weight Australian Pine Wood. * Set of 2mm Patch cords for interconnections * User’s Manual with sample experimental programs