PLC Trainer – Omron PLC Model PCT 040
PLC Trainer – Omron PLC Model PCT 040
Sci-tech PLC Trainer with Omron PLC Model PCT 040 is designed to familiarize students with PLC Controller & its programming techniques. The Trainer has Input & Output devices (Switches & Indicators) that can be wired to PLC to test the program. The PLC Input / Output terminals are connected to sockets that can be connected by cables to Switches & Indicators for testing of the program. The setup is mounted on Aluminum frame. A synopsis is provided showing Electrical connections of PLC so that wiring of PLC can be understood.
Item Description
Features
– Includes commonly used Industrial PLC Controller.
– Integrated Input & output devices to test program.
– Includes PC Based programming software as well as Programming Console.
PLC – Omron: Model – CPM1A-20CDR-A-V1; Inputs: 24 V DC, 12 Nos.
– Relay Outputs: 8 Nos.
– Power Supply: 100 to 240 VAC, 50/60 Hz
– Control method: Stored program method
– I/O control method: Combination of the cyclic scan and immediate refresh processing
– Programming language: Ladder diagram
– Basic instructions: 14 types
– Special instructions: 79 types, 139 instructions
– Program capacity: 2,048 words
– Pulse output: 1 point: 2 kHz
– High-speed counter: 1 point: Single phase at 5 kHz or two-phase at 2.5 kHz
Incremental mode: 0 to 65535 (16-bit)
Decremental mode:–32767 to 32767 (16-bit)
1 point: Single phase at 5 kHz or two-phase at 2.5 kHz
Incremental mode: 0 to 65535 (16-bit)
Decremental mode:–32767 to 32767 (16-bit)
– Timers/Counters : 128: TIM/CNT 000 to 127
100-ms timer: TIM 000 to TIM 127
10-ms timer: TIM 000 to TIM 127
Decremental counter, reversible counter
See also different:
The air-cooled single-cylinder four-stroke petrol engine is identical in design to the four cylinder engine. Sci-tech AM 133M is fitted with a special device to adjust the ignition timing - from advanced to retarded. The engine includes a sens [...]
Sci-tech Process Pilot Plant for Multi Process Control Trainer Model PCT 101 is designed to familiarise students with the control of various parameters like flow, level, temperature and pressure. Various control schemes1 such as feed back, fee [...]
