Technical Specifications

Hydraulic Trainer Model HT-009

Oil Distribution and manual controls, gauges

Sub plate (1 station manifold) with 4 ports & 2 gauge pots – 4 Nos.

Quick Release Male Adapters – 21 Nos.

70 bar Glycerin filled pressure gauges to and a and b ports. – 4 Nos.

 

Direction Control element

4/2 way DC valve lever operated spring return. – 1 No.

4/2 way DC valve, AC 230Vac solenoid operated spring return. – 1 No.

4/3 way DC valve, lever operated spring return. – 1 No.

4/3 way DC valve lever operated detented. – 1 No.

 

Actuating devices (output)

Single acting cylinder 40mm x 100mm – 1 No.

stroke with QR adaptors – 1 No.

Double acting cylinder with in line flow control valve 40mm x 100mm – 1 No.

stroke & QR adaptors – 2 Nos.

 

 

 

 

Connections

1. A) Flexible hoses, R1 type ¼” ID with Quick release sockets (one end 900 & other straight)

Length 2000mm – 2 Nos.

Length 1200mm – 2 Nos.

1. B) Quick release plugs (M) – 21 Nos.

Quick release sockets (F) – 8 Nos.

 

Electrical Connection

Mains cord for 230Vac solenoid with stackable connector – 1 No.

 

Resource Panel – NA

 

Power generation

Power pack consist of :

1. tank 25L – 1 No.
2. Gear Pump 3LPM with ball valve for flow measurement in Beaker. (Optional) – 1 No.
3. Electric motor 0.5HP 1440 RPM 230V AC – 1 No.
4. Air Breather, Oil level Indicator, suction filter / Stainer , Return line filter, 70 Bar Gauge – 1 No.
5. Relief valve

 

Mechanical dimension

• Anodized sturdy profile panel (table top) system Aluminum profile groove experiment board.(Optionally double sided)
• Total dimension : 116 cm (L) x 91cm (H) x 30cm (W), Net wt : 125Kg.Aluminum Grooved T bolt Board :
• L=1070mm, W=700mm.Reclining at. 0, 20,30. Oil tray (107 cm x 300 cm x 2 cm ) Power coated MS.

 

Electro-Hydraulic Trainer Model EHT-009

Oil Distribution and manual controls, gauges

Sub plate (1 station manifold) with 4 ports & 2 gauge pots – 4 Nos.

Quick Release Male Adapters – 13 Nos.

Modular Pressure relief valve (sub plate mounted) with 70 bar – 1 No.

Glycerin filled pressure gauges to and a and b ports. – 4 Nos.

Throttle cum check valve(sub plate mounted) – 1 No.

 

Direction Control element

4/2 way single solenoid 24 VDC spring return – 1 No.

4/3 way double solenoid 24 VDC spring return – 1 No.

 

Actuating devices (output)

Single acting cylinder 40 mm x 100 mm spring return & QR adaptor – 1 No.

Double acting cylinder 40mm x 100 mm & QR adaptors – 1 No.

 

 

 

 

Connections

1. A) Flexible hoses, R1 type ¼” ID with Quick release sockets (one end 900 & other straight)

Length 2000mm – 2 Nos.

Length 1200mm – 2 Nos.

1. B) Quick release plugs (M) – 13 Nos.

Quick release sockets (F) – 8 Nos.

 

Electrical Connection

Electrical circuit 4mm Banana Patch cord

1 mtr – 12 Nos.

500mm – 10 Nos.

100mm – 10 Nos.

 

Resource Panel

24V DC power supply. 8 Relay card PLC interface able with NO NC contact & 24Vdc coils, Dual Timer WITH NO-NC contacts or Optionally LGPLC (12 inputs + 8 outputs) with CDP and ladder software – 1 No.

 

Power generation

Power pack consist of :

1. tank 25L – 1 No.
2. Gear Pump 3LPM with ball valve for flow measurement in Beaker. (Optional) – 1 No.
3. Electric motor 0.5HP 1440 RPM 230V AC – 1 No.
4. Air Breather, Oil level Indicator, suction filter / Stainer , Return line filter, 70 Bar Gauge – 1 No.
5. Relief valve

 

Mechanical dimension

• Anodized sturdy profile panel (table top) system Aluminum profile groove experiment board.(Optionally double sided)
• Total dimension : 116 cm (L) x 91cm (H) x 30cm (W), Net wt : 125Kg.Aluminum Grooved T bolt Board :
• L=1070mm, W=700mm.Reclining at. 0, 20,30. Oil tray (107 cm x 300 cm x 2 cm ) Power coated MS.