FUNDAMENTALS OF HYDRAULICS TRAINER SET UP Model HT 011
FUNDAMENTALS OF HYDRAULICS TRAINER SET UP Model HT 011
Sci-tech Fundamentals of Hydraulics Trainer Set Up Model HT 011 is designed to meet the requirements for learning complex inner dynamic structure and working principle of hydraulic components.
- The structure of hydraulic component is designed according to real industrial hydraulic component, which is light in weight and small in size. Due to this, students can start or stop experiment in a short time.
- All the hydraulic components are equipped with quick installing baseboard and quick connecting joint to ensure convenient operation. By using double-locking quick connecting tube, students can replace an oil tube in 6 seconds without leakage.
- The PLC module and electrical control module are modular designed to avoid cross interference of electrical circuit when doing experiment.
- Safety protections: grounded, lead protection, safety in accordance with related BS standards. Insulated safety sockets, sheathed cables and wires.
| Size: | 150cm x 60cm x 170cm (LxWxH) |
| Weight: | 65 kg |
Item Description
Sci-tech Fundamentals of Hydraulics Trainer Set Up Model HT 011 is designed to meet the requirements for learning complex inner dynamic structure and working principle of hydraulic components.
• The structure of hydraulic component is designed according to real industrial hydraulic component, which is light in weight and small in size. Due to this, students can start or stop experiment in a short time.
• All the hydraulic components are equipped with quick installing baseboard and quick connecting joint to ensure convenient operation. By using double-locking quick connecting tube, students can replace an oil tube in 6 seconds without leakage.
• The PLC module and electrical control module are modular designed to avoid cross interference of electrical circuit when doing experiment.
• Safety protections: grounded, lead protection, safety in accordance with related BS standards. Insulated safety sockets, sheathed cables and wires.
Technical Specifications
Specifications
- Training system providing an introduction to the fundamentals of hydraulic control engineering
- Aluminum profile panel for quick component fixing
- Oil drip tray
- Standard industrial hydraulic components
- Various multi-way valves, pressure limiting, check, restrictor, flow control and non-return valves
- Hydraulic motor
- Diaphragm accumulator
- Weighted piston with guard
- Pressure hoses with self-closing quick-couplers
- Drive unit with gear pump
Technical Parameters
- Input Voltage : Single-phase AC 220V, 50Hz
- Temperature : -10~50ºC, Below RH 90%
- Permanent magnet DC speed regulating motor: 1.8A, DC220V, 400W, 0~1200rpm
- Oil tank: 30L with liquid level meter, oil temperature indicating meter, oil filter, safety valve, etc.
- Overall power consumption：≤2.0 kVA
>SPECIFICATIONS
> HYDRAULIC COMPONENTS
- Training Bench (Qty:1)
»Size: 1560mm×650mm×1800mm
- Power supply control panel (Qty:1)
»Input: AC 220V
»Output: DC 24V
- Button module (Qty:1)
- Oil pump control module (Qty:1)
- Intermediate relay module (Qty:1)
- Power line (Qty:2)
- Safety connecting line (Qty:40)
- Pump station (400W) (Qty:1)
- Hydraulic oil (20kg)
- Funnel (Qty:1)
- Lacquer tray (Qty:1)
- Experimental tube (Qty:25)
- Tools
»Scissor (Qty:1)
»Phillips screwdriver (Qty:1)
»Slot type screwdriver (Qty:1)
»Socket head wrench (Qty:4)
»Open wrench (Qty:2)
»Tool box (Qty:1)
»Three-plug socket (Qty:1)
»Pliers (Qty:2)
»Fuse (2A) (Qty:10)
- Programming software (copy) (Qty:1)
»Auxiliary oil tank (Qty:1)
»Double acting hydro-cylinder (Qty:2)
»Spring return hydro-cylinder (Qty:1)
»Pressure hydro-cylinder (Qty:1)
»One-way valve (Qty:2)
»Hydraulic controlled one-way valve (Qty:2)
»Direct acting overflow valve (Qty:2)
»Pilot overflow valve (Qty:1)
»Throttle valve (Qty:1)
»Sequence valve (Qty:2)
»Speed regulating valve (Qty:2)
»Reducing valve (Qty:1)
»4/2 way stroke directional valve (Qty:1)
»5/3 way hand- directional valve (Qty:1)
»2/2 way solenoid directional valve (Qty:1)
»4/2 way solenoid directional valve (Qty:2)
»4/3 way solenoid directional valve (Qty:3)
»Pressure gage (Qty:3)
»Pressure relay (Qty:1)
»Travel switch (Qty:4)
»Four-way board (Qty:2)
|
»Three-way board (Qty:2) |
Experiments Capabilities:
- Comprehensive experimental introduction to the fundamentals of hydraulic drive and control engineering
- Familiarisation with terms and symbols
- Representation of hydraulic circuits
- Drive unit
- Multi-way valves and drives
- Shut-off and flow control valves
- Pressure valves and pressure switches
- Hydraulic accumulators
- Application circuits
- Commissioning and maintenance
Model Number
HT 011
See also different:
A Microcontroller is a type of micro-processor emphasizing high integration, low power consumption, self-sufficiency and cost effectiveness. The microcontroller design integrates additional elements such as Read-write memory for Data storage. [...]
