Eccentrically Loaded Tie Apparatus Model MT 084

Sci-tech Eccentrically Loaded Tie Apparatus Model MT 084 This table unit is used to observe the deformation of a bar under constant bending moment.

Table unit for the demonstration of the relationship between load and deformation on a bending bar

Item Description

The brass bending bar is positioned on two bearings that are fitted to a base plate. At the ends of the bending bar are struts using which the bending moment can be applied. The bending moments are generated using a set of weights and a cord. The resulting bar deformation is measured using a position measurement gauge mounted on a movable stand. It is possible to measure the deformation at any point between the bar bearings. The unit is suitable both for laboratory use for student experiment, and for demonstrations performed by the lecturer.

Technical Specifications

[1] Table unit for the demonstration of the relationship between load and deformation on a bending
bar.
[2] Bent bar length 490mm
[3] Bar cross-section 10x10mm
[4] Bar material brass
[5] Weight set up to 20N
[6] Position measurement gauge 0…10mm, graduations 0.01mm
Brass bar, bent length: 490mm
Cross-section: 10x10mm
Modulus of elasticity: 95000N/mm

Dial gauge: 10mm, graduations 0.01mm
Set of weights: up to 20N

1 exp. app., complete,
1 bending bar,
1 dial gauge,
1 set of weights,
1 instruction manual