Butterfly Valve & Non-Return Valve Assembly Model FMCS-BVNR
Home » Products » Butterfly Valve & Non-Return Valve Assembly Model FMCS-BVNR
Butterfly Valve & Non-Return Valve Assembly Model FMCS-BVNR
Sci-tech Butterfly Valve & Non-Return Valve Assembly Model FMSC-BVNR are used where flow reversal is not permitted. They must fully seal off the reverse direction while offering the lowest possible resistance in the forward flow direction. If the differential pressure of the medium falls below the value as dictated by the spring force, the valve closes. Non-return valves are installed in pipelines, and must close if the pressure drops or if a high back-pressure occurs. They are largely maintenance-free and low-wearing.
Item Description
Butterfly valves are installed in the pipelines of water supply pumping stations and filter systems; in power station cooling circuits; in the chemical industry for process water, including acidic and alkaline media; and in sewage treatment plants. They seal drip-tight like gate valves, and take up little space, as they are usually similar in size to the pipe cross-section. Butterfly valves are constructed for ultra-large nominal widths (DN5300). Their operating pressure is normally in the range 4…16bar. Butterfly valves may be operated by hand, by electric motor via a spur gear segment or worm gear, or by a hydraulic piston. The valve is closed by rotating its shaft through 90°. The practice kit forms part of the Sci-tech assembly, maintenance and repair practice line designed for training at technical colleges and in company training centres. A close link between theory and practice is key to the learning content. FMSC-BVNR enables two typical industrially relevant valves and fittings to be assembled and disassembled. Students become familiar with all the components and their modes of operation. The parts are clearly laid out and well protected in a tool box. Systematic assembly and disassembly of the valves and fittings is practiced. The accompanying material details the individual steps involved in assembly, and provides additional information on the areas of application, mode of operation and design of the valves and fittings.
Salient Features
* Practical exercise based on the assembly of a butterfly valve and a non-return valve
* Comprehensive and well-structured instructional material
Technical Specifications
SPECIFICATIONS
[1] learning concept for assembly exercises on valves and fittings [2] butterfly valve with manual adjuster, as set of parts [3] typical non-return valve, as set of parts [4] complete assembly tool kit [5] valve parts and tools housed in a sheet-steel tool box [6] the kit forms part of the Sci-tech assembly, maintenance and repair practice line
TECHNICAL SPECIFICATIONS
Butterfly valve with flange connections
– materials
housing: grey cast iron
disk, shafts: stainless steel
sleeve: rubber
hand lever: aluminum
bush: bronze
Non-return valve with flange connections:
– materials
housing: grey cast iron
taper, spring: stainless steel
flat seal: graphite
Experiments – design and function of a butterfly valve – design and function of an a non-return valve – assembly and disassembly, including for the purposes of maintenance and repair – replacing components (e.g. seal) – comparison of 2 different valves and fittings – reading and understanding engineering drawings and operating instructions – leak testing (together with hydraulic valves and fittings test stand)
See also different:
Sci-tech Stability of a Floating Body Apparatus Model FM 11 is a bench top unit designed to demonstrate the conditions for the stable, unstable and neutral equilibrium. The position of metacenter and hence the metacentric height can be varied [...]