AXIAL & CENTRIFUGAL FLOW FAN DEMONSTRATION UNIT Model FM 86

AXIAL & CENTRIFUGAL FLOW FAN DEMONSTRATION UNIT Model FM 86

Sci-tech Axial & Centrifugal Flow Fan Demonstration Model FM 86 is a self-contained bench top unit designed to demonstrate the working of axial & Centrifugal flow fan and to conduct experiments to study the performance of a typical axial flow fan. It consists of a duct in which a single stage axial flow fan& centrifugal fan rotates and sucks air at one end of the duct and delivering air at the other end. A major portion of the ducting is transparent and permits visual observation of the working of the fan and the measurement system. The fans are driven by a variable speed motor. The differential pressure across the fans are measured using the electronic transducer. The air flow rate through the fan can be varied using the adjustable aperture device and flow rate is measured using an orifice plate. Temperature of air at inlet and the rotational speed of the impeller are measured. Control panel with the digital display of measured parameters is provided. Computer based data acquisition and processing system with software is provided.

Size: 80cm x 50cm x 50cm (LxWxH)
Weight: 25 kg

Item Description

Axial flow fan is a device in which air flows in the axial direction and energy transfer takes place from the rotating rotor to the surrounding fluid. The rotor consists of blades and the kinetic energy of air is increased by the momentum transfer during the passage of air through the blades. Axial flow fans are used in several applications involving higher flow rates and lower delivery pressures, such as air conditioning, air circulation, aircraft engines and power plants and cooling. Study of the characteristics of axial flow fans is an important topic in turbo-machinery.

The Sci-tech Axial & Centrifugal Flow Fan Demonstration Model FM 86 is an important equipment for fluid-machinery or turbo-machinery laboratories of mechanical, aeronautical, chemical and propulsion engineering departments of educational institutions.

The Sci-tech Axial & Centrifugal Flow Fan Demonstration Model FM 86 is a self-contained bench top unit designed to demonstrate the working of axial & Centrifugal flow fan and to conduct experiments to study the performance of a typical axial flow fan. It consists of a duct in which a single stage axial flow fan& centrifugal fan rotates and sucks air at one end of the duct and delivering air at the other end. A major portion of the ducting is transparent and permits visual observation of the working of the fan and the measurement system. The fans are driven by a variable speed motor. The differential pressure across the fans are measured using the electronic transducer. The air flow rate through the fan can be varied using the adjustable aperture device and flow rate is measured using an orifice plate. Temperature of air at inlet and the rotational speed of the impeller are measured. Control panel with the digital display of measured parameters is provided. Computer based data acquisition and processing system with software is provided.      

Technical Specifications

specifications:

  1. Axial flow fan, single stage, max. pressure: 1 kPa., max. flow:  0.05 m3/s.
  2. Centrifugal flow fan, single stage, max. pressure: 2 kPa., max. flow:  0.10 m3/s.
  3. Motor, variable speed induction type, 20W.
  4. Duct, Plexiglas, 100mm diameter.
  5. Inlet section with bell mouth.
  6. Flow straightener.
  7. Adjustable aperture device.
  8. Power meter, 50W.
  9. Orifice plate for air flow measurement.
  10. Differential pressure across fan and orifice plate.
  11. Differential pressure transducers (2 Nos.) with digital display.
  12. Thermocouple, 1000C with digital display for air inlet temperature.
  13. Optical speed sensor for impeller speed, 1500 RPM.
  14. Control panel.
  15. Optional ‘Sci-Cal’ PC based data acquisition and processing system including latest Pentium processor, electronic signal conditioning system and stand-alone data acquisition modules.
  16. Windows based data acquisition software for data logging, signal analysis, process control, real time display, tabulation of results and preparation of graphs of experimental results.

The manual describing the theoretical and practical aspects of the apparatus, operation, maintenance and analysis of results will be supplied with the equipment. 

Services required:

Electrical supply, 220 V, single-phase, 50 Hz.

 

Experiments: 

  1. Study of the working principle of an axial & centrifugal flow fan.
  2. Measurement of static and total pressure rise across the fan, flow velocity and volume flow rate through the fan, fan inlet temperature, rotational speed of the impeller and power input to the fan motor.
  3. Determination of overall efficiency of the fan and estimation of the impeller efficiency at constant rotational speed and various flow rates.
  4. Determination of performance at different rotational speeds.
  5. Presentation of performance test results in dimensionless form and introduction to similarity laws.
  6. Conduct performance tests in manual mode and compare with the results obtained using ‘Sci-Cal’ computer-based data acquisition and processing.

Model Number

FM 86

See also different:

IMPACT OF JET APPARATUS Model FM 01
IMPACT OF JET APPARATUS Model FM 01

Sci-tech Impact of Jet Apparatus Model FM 01 has been designed to measure the force generated by the impingement of the jet of water on a stationary object and to demonstrate the principle of linear momentum. The apparatus can be used with the [...]

Hydraulic Flow Demonstrator Model FM 71
Hydraulic Flow Demonstrator Model FM 71

The flow channel of Sci-tech Hydraulic Flow Demonstrator Model FM 71 is constructed using clear acrylic for visibility and is supported by a floor-standing, metal frame fitted with castors for mobility.

Power Transmission Line Trainer Model ELTR 025C
Power Transmission Line Trainer Model ELTR 025C

High-voltage networks are usually operated with voltages in the region of 110 kV to 380 kV, whereby urban areas and large-scale industrial facilities are supplied with 110 kV, and 380 kV is used for long-distance transmission lines. The line s [...]


| << return to catalog |