Automotive Actuator Trainer Model AM 034
Automotive Actuator Trainer Model AM 034
Sci-tech Car Electric Actuator Trainer Model AM 034 have the main components of the car electric system fixed together on a board and can be operated on 12V means of a transformer-rectifier unit (220V/12V).
System is mounted on M.S. Structure. Separate Teacher panel will have facility of fault creation & student has to study all parameter & find the fault in the system.
There is different trouble shooting in the car electric circuit given as below which can solve by using a fault trainer.
Item Description
– Compact, comprehensive, sturdy design
– All working Systems can be studied to their operations.
– Basic Trainer instrumentation as optional attachments.
– Fault creation panel for teacher & faultfinding & remedies panel for students
– Slide, Charts, CBT as an optional Accessories
Technical Specifications
Colored schematic diagram with 5 LED for locating the tested components in the vehicle Analysis of fuel injector control signal with speed variation from 900~6000rpm and adjustable injection timing from 2ms~12ms Exhaust gas recirculation valve with test points for the analysis of the signal for adjusting the valve opening versus the duty cycle varying from 10%~90%
Simulated common rail injector with test points for the analysis of the adjustments of:
– pre-injection time from 0.1~0.7ms
– delay of injection pulse from 0.7~4.5ms
– injection time form 0.2~1.8ms
– control frequency between 15Hz and 80Hz (900-4000rpm)
– injector opening pulse of 70V
Stepper motor for idle control with 4 test points for the analysis of the signal on each winding Regulation of pilot tone from 5Hz~50Hz; four LESs indicate the bias of windings Possibility of reversing the rotation direction and measurement on a milli-metric scale
Starting system – Battery, starting motor, wiring, and switches
Charging system – Alternator and regulator, with wiring
Ignition system
Teacher panel
Student panel.
Accessory system – Horns, lighting, instrument panel warning system.
See also different:
Sci-tech Flow of Bulk Solids from Silos Apparatus Model FM 120 provides a practical demonstration of the types of discharge from different silos: mass flow, funnel flow and arching. The type of discharge that occurs is dependent on the flow pr [...]
Sci-tech introduces students to the fundamentals of packed bed catalytic reactors. It is a bench-top unit available with either two or three reactor columns. Using two columns with a chemical catalyst allows a different particle size exchange [...]
Sci-tech Thermal Conductivity Unit for Liquids and Gases Model TH 014 has been designed to study steady state one dimensional heat conduction in liquids and gases. Provision is made to determine the thermal conductivity of fluids such as air, [...]