Acceleration of Geared Systems Apparatus Model MT 059
Acceleration of Geared Systems Apparatus Model MT 059
Sci-tech Acceleration of Geared Systems Apparatus Model MT 059 basically consists of three shafts, each mounted on ball races and connected by gearing.
A flywheel is attached to one of the shafts.
The discs having varying mass moments of inertia can be attached to the other two shafts.
It permits to change the gear ratios. Gears of suitable sizes are provided.
A torque drum is mounted in each shaft and by means of masses or weights, attached to one of the drums with a cord, allow a way to apply a torque to the system.
The acceleration of the system can be calculated.
Manuals: This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance and Practices Manuals.
In order to carry out some of the practices with Sci-tech Acceleration of Geared Systems Apparatus Model MT 059, 1 set of weights is required.
| Size: | 90cm x 60cm x 95cm (LxWxH) |
| Weight: | 35 kg |
Item Description
Sci-tech Acceleration of Geared Systems Apparatus Model MT 059 is supported in a metallic frame and can be wall mounted.
Sci-tech Acceleration of Geared Systems Apparatus Model MT 059 basically consists of three shafts, each mounted on ball races and connected by gearing.
A flywheel is attached to one of the shafts.
The discs having varying mass moments of inertia can be attached to the other two shafts.
It permits to change the gear ratios. Gears of suitable sizes are provided.
A torque drum is mounted in each shaft and by means of masses or weights, attached to one of the drums with a cord, allow a way to apply a torque to the system.
The acceleration of the system can be calculated.
Manuals: This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance and Practices Manuals.
In order to carry out some of the practices with Sci-tech Acceleration of Geared Systems Apparatus Model MT 059, 1 set of weights is required.
Technical Specifications
Specifications
Bench-top unit with adjustable legs.
Anodized aluminum structure and panels in painted steel. Model MT 059 unit mainly consists of:
3 Shafts of different length and, therefore, different moment of inertia. 6 Gears:
- Gear type 1:
Number of teeth: 90.
Moment of inertia I: 0.00427 kg·m2.
- 2 Gears type 2:
Number of teeth: 60.
Moment of inertia I: 0.0011kg·m2.
- 2 Gears type 3:
Number of teeth: 70.
Moment of inertia I: 0.00268 kg·m2.
- Gear type 4:
Number of teeth: 80.
Moment of inertia I: 0.00336 kg·m2.
- 3 Pulleys:
Diameter: 0.08 m.
Moment of inertia I: 0.00016 kg·m2.
- 3 Masses of inertia of different diameters and, therefore, different moment of inertia.
In order to carry out some of the practices with MT 059 unit, a “B” Type Set of weights is required.
Accessories
Set of weights:
6 weights of 200 gr.
6 weights of 100 gr.
2 weights of 50 gr.
2 weights of 20 gr.
2 weights of 10 gr.
1 support hook of 100 gr
Experiment Possibilities
- Determination of the moment of inertia of a gear system under different arrangements.
- Determination of the moment of inertia of a gear system with one, two or three shafts.
- Determination of the minimum mass required to accelerate a gear system with one, two or three shafts.
- Comparison of the experimental and theoretical moment of inertia.
- Study of the gear ratio of the shafts when different moments or force couples are applied to the system.
- Determination of the acceleration of the system.
Model Number
MT 059
See also different:
Aesthetically designed injection moulded electronic desk. Master unit carrying useful experiment resources. Hands on learning by constructing circuits using built in power bread board panel as well as optionally using Discrete component panel. [...]
Sci-tech Transmission Line Trainer ( Simulated line ), Model TCM 018S is a versatile training system for investigating the characteristics of a transmission line, including attenuation, delay, matching, frequency response, standing waves AC li [...]