Flow Boiling Demonstration Apparatus Model BSG 005
Sci-tech Flow Boiling Demonstration Apparatus Model BSG 005, the process of evaporation in heated pipes that occurs in water-tube boilers can be demonstrated. The different phases that appear during evaporation in the pipe can be clearly seen. The double-wall glass evaporation pipe allows the evaporation process to be observed closely. Hot water flows through the outer pipe and evaporates the medium in the inner pipe. The non-toxic liquid used starts to evaporate at 40 to 50°C. Low system pressures can be generated with the built-in water jet pump.
With Sci-tech Flow Boiling Demonstration Apparatus Model BSG 005, the process of evaporation in heated pipes that occurs in water-tube boilers can be demonstrated. The different phases that appear during evaporation in the pipe can be clearly seen. The double-wall glass evaporation pipe allows the evaporation process to be observed closely. Hot water flows through the outer pipe and evaporates the medium in the inner pipe. The non-toxic liquid used starts to evaporate at 40 to 50°C. Low system pressures can be generated with the built-in water jet pump.
The pipe systems are clearly laid out on a metal panel. The hot water circuit consists of an expansion vessel, a circulating pump and heater. An evaporation pipe, vapour collector, water-cooled condenser and return pipe form the evaporation circuit.
SYSTEM COMPONENTS
- Cooling water connection,
- Evaporator pipe,
- Shut off valve,
- Water jet vacuum pump,
- Collector with manometer, excess pressure valve and bleeding,
- Condenser,
- Hot water expansion vessel,
- Thermometer for hot water feed,
- Switch for heater and pump,
- Circulating pump,
- Electrical heater with thermostat
OPERATION & MAINTENANCE MANUAL
Self-explanatory operating & maintenance manual will be provided. This will include Theory, operating procedure, standard results, and maintenance procedures.SERVICE REQUIRED AT SITE
- Electric supply 220 ~ 240V AC, 50 Hz
- Water line
