GSM Trainer Model TCM 010-15 & 16
GSM Trainer Model TCM 010-15 & 16
Sci-tech GSM Trainer Model TCM 010-16 is a modem or mobile equipment for transmission of voice and data calls as well as SMS (Short Message Service) in GSM Network. To control the GSM modem there is an advanced set of AT commands according to GSM European Telecommunications Standards Institute implemented. The GSM standard has established itself across continents. The trainer is well suited for studying AT commands by camping to real networks using SIM card.
Sci-tech GPS Tracking Unit Model TCM 010-15 is a device that uses the Global Positioning System to determine the precise location of a vehicle, person, or other asset to which it is attached and to record the position of the asset at regular intervals. A GPS tracker essentially contains GPS module to receive the GPS signal and calculate the coordinates.
Item Description
EXPERIMENTS
Model TCM 010-16
-Study of GSM technology
-Getting started with GSM trainer
-Study of GSM MODEM and it’s components
-Study of SIM
– Introduction to AT commands
-Voice communication using AT commands
-Data communication using AT commands
-Sending text message using AT Commands
MODEL TCM 010-15
-Introduction to GPS, software installation
-Getting started with GPS training system
-Satellite signal strength indication using SNR plot
-Study of satellite azimuth and elevation window using sky plot
-Geographical location with (GMT/IST) with navigation window
-To study geographical position using survey plotting
-Study of NEMA received sentences using trace window
Technical Specifications
GSM Trainer Model TCM 010-16
– Quad-Band GSM/GPRS 850/ 900/ 1800/ 1900 MHz
– Built in RS232 Level Converter (MAX232) provided in 9 Pin D type connector
– Configurable baud rate
– SMA connector with GSM L Type Antenna.
– Built in SIM Card holder.
– Built in Network LED, Status LED, Power LED
– Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
– Audio interface Connector
– AT cellular command interface through Windows based Hyperterm Software
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +9V/1.5A
– Attractive ABS Plastic Enclosure.
– Set of 2mm Patch cords for interconnections
– Normal operation temperature: -20 °C to +55 °C
TCM 010-15 GPS TRAINER
– L1 Frequency, C/A code, 51-channel High Sensitivity: Up to -158 dBm tracking, superior urban
performances
– Position Accuracy：< 3m CEP (50%) without SA (horizontal)
– Cold Start is Under 36 seconds (Typical)
– Warm Start is Under 34 seconds (Typical)
– Hot Start is Under 1 second (Typical)
– Max. Update Rate：5Hz (Default: 1 Hz)
– Pin header Connection for easy to assemble
– Low Power Consumption：55mA @ acquisition, 40mA @ tracking
– 9600 baud rate Serial Transmission
– Built in RS232 Level Converter (MAX232) provided in 9 Pin D type connector
– Windows based software support GPS Status, Signal Level, Sky chart constellation of SV,
– All interconnections are made using 2mm banana Patch cords.
– Test points are provided to analyze signals at various points.
– All ICS are mounted on IC Sockets.
– Bare board Tested Glass Epoxy SMOBC PCB is used.
– In-Built Power Supply of +3.3V/1A with Power ON indication
– Attractive ABS Plastic Enclosure.
– Set of 2mm Patch cords for interconnections
– Normal operation temperature: -20 °C to +55 °C
– Input Voltage: 230V AC
– User’s Manual
See also different:
Recent advances in wideband communication channels and solid-state electronics have allowed scientists to fully realize its advantages and thereby helping digital communications grow quickly. Digital communications is quickly edging out analog [...]
